Lookout Tower at Krali?ák by Hu? architektury Martin Rajniš

Czech architect David Kubík from studio Hu? architektury Martin Rajniš designed a Lookout Tower at Krali?ák. It is a year-round accessible 35 meters tall lookout tower from larch logs – the center of the ski resort Krali?ák. Take a look at the complete story after the jump.

From the architects: The lookout tower is a result of several years of collaboration with the local ski resort Krali?ák. It is situated at the highest point between Hyn?ice and St?íbrnice on the hilltop Štvanice 866 m.a.s.l. The supposed center of the resort, on the hill in the forest amongst ski slopes. Around it is a beautiful dramatic vast landscape. The old town, a view of the entire Jeseníky mountains, on the other side, the heavily wooded hillside of Králický Sn?žník where the Morava river springs from.

The assignment has been fulfilled, a year-round accessible, 35 meter tall lookout tower, situated at the top station of the chair lift – the center of the resort.
The tower stands here as a confident slim round obelisk. A center-point. A simple structural diagram, a slim, 35m tall vertical secured by cables. While designing, we were searching for economical, rational solutions that would be an answer to the assignment. We try to base the idea on the location. Stone/wood. As a construction material we chose larch logs. It is used in the way it is pretty much present all around. The tree trunks standing vertically, connected together, elevating the viewing platform, protected against wind by safety glass. In the center of the tower hangs a round wooden staircase, like a pendulum, it balances the gusts of wind.

After 152 steps, you ascend above treetops of the surrounding forest. Above you are only signal red lights and a wind vane.
Sizing wasn’t easy. This location is tested by strong winds and snow/ice.

The logs are, after 5m in height, connected by a steel joint to which a stiffening polygon/ triangle is attached. Also in these points, the individual rods are fixated. Horizontal and torsional forces are caught by steel cables fixated into bases located 15m away from the tower.

Larch itself is well resistant against weather conditions and furtherly a pressure impregnation is used, the wood isn’t in contact with soil moisture and joints are designed as drying, therefore we believe this tower should last at least 30 years.


Used materials and products

• Reinforced concrete foundations – concrete C30/37
• Micro stilts – steel tubes of a 89 mm and 109 mm diameter (steel S355), root diameter 200 mm and 300 mm
• Main poles on tower and platform – wooden larch logs (C24), pressure impregnated, diameter of about 280 mm
• Wooden bearing elements of the staircase, bearing elements of the glass view point – planed larch squared timber (C24)
• Steel elements of the bearing structure of the tower and viewing platform – steel S355 J2, heat galvanized
• Connection materials in the strength class 8.8 (heat galvanization)
• Outer bearing cables – heat galvanized steel cables of 20 mm in diameter CS818 – 1960 MPa, a combination of system and atypical end pieces from steel S355 J2
• Glass panes in aluminum frames, quenched glass
• Viewing platform cladding and flooring – larch boards
• Roofing (except for glass surfaces) – flat top roof with plastic membrane roofing and gravel ballast

Photography by Jakub Skokan and Martin T?ma at BoysPlayNice

Find more projects by Hu? architektury Martin Rajniš:

Tips to Keep Your Home Safe from Crime

What To Do In Your Garden Come Spring Time